Plastic waste management: Need for a paradigm shift in Malaysia
Article Sidebar
Published:
Apr 29, 2004
Main Article Content
Abstract
Over the last century, plastics have become a major new material used widely for a variety of
products world wide, including replacements for human body parts, to the construction of supersonic
aircraft and spacecraft. The growth of plastic production has taken place at the expense of more traditional
materials, such as steel, aluminium, paper and glass. It is estimated that 30% of used plastics are eventually
discarded into the environment, and since conventional plastics are produced from petrochemical
compounds and are non-biodegradable it becomes an environmental hazard when land- filled. Plastic waste
generated and quantity generated is a growing concern in many developing countries, including Malaysia.
Plastic industry in Malaysia, which began in 1950, registered a 15% growth per— annum. The plastics
produced are mainly used by the packaging industry (35%), while electrical and electronic industn used
30%. Other users are households (12%), automotive industry (8%) and construction (7%). Concurrently,
the total resin consumption has reached 1.20 million metric tons in 2000. while the per capita consumption
increased from 20kg in 1989 to 55 kg in 1997. It is estimated to reach 60kg in 2003. The growth is
expected to continue and the plastic industry is projected to achieve double-digit growth for the fourth
consecutive year in 2002. In the year 2000, Malaysians used about 600.000 tonnes of plastics, while
recycling was extremely low. Hence, 99.99% of the household plastics end-up in the 144 landfills. Plastic
components in the Municipal Solid Waste (MSW) from urban areas average 18%. but in some areas
(Labuan) it can go as high as 48%. Research in plastics is concentrated in the development of bioplastics
using renewable resources and organic waste. Since the costs of bioplastics are currently much higher than
conventional plastics due to raw materials costs and production expenses, hence the need to use materials
that are available at low cost, such as palm oil mill effluent and kitchen waste. Biodegradability of
degradable plastics (Environmentally Degradable plastic, EDP) is another area of scientific investigations.
Results obtained from oxidative exposure, composting trials and microbial anahsis showed positively EDP
is biodegradable. Physical and chemical analysis, including Fourier Transform Infra Red (FTIR) spectrum
confirmed the biodegradability
products world wide, including replacements for human body parts, to the construction of supersonic
aircraft and spacecraft. The growth of plastic production has taken place at the expense of more traditional
materials, such as steel, aluminium, paper and glass. It is estimated that 30% of used plastics are eventually
discarded into the environment, and since conventional plastics are produced from petrochemical
compounds and are non-biodegradable it becomes an environmental hazard when land- filled. Plastic waste
generated and quantity generated is a growing concern in many developing countries, including Malaysia.
Plastic industry in Malaysia, which began in 1950, registered a 15% growth per— annum. The plastics
produced are mainly used by the packaging industry (35%), while electrical and electronic industn used
30%. Other users are households (12%), automotive industry (8%) and construction (7%). Concurrently,
the total resin consumption has reached 1.20 million metric tons in 2000. while the per capita consumption
increased from 20kg in 1989 to 55 kg in 1997. It is estimated to reach 60kg in 2003. The growth is
expected to continue and the plastic industry is projected to achieve double-digit growth for the fourth
consecutive year in 2002. In the year 2000, Malaysians used about 600.000 tonnes of plastics, while
recycling was extremely low. Hence, 99.99% of the household plastics end-up in the 144 landfills. Plastic
components in the Municipal Solid Waste (MSW) from urban areas average 18%. but in some areas
(Labuan) it can go as high as 48%. Research in plastics is concentrated in the development of bioplastics
using renewable resources and organic waste. Since the costs of bioplastics are currently much higher than
conventional plastics due to raw materials costs and production expenses, hence the need to use materials
that are available at low cost, such as palm oil mill effluent and kitchen waste. Biodegradability of
degradable plastics (Environmentally Degradable plastic, EDP) is another area of scientific investigations.
Results obtained from oxidative exposure, composting trials and microbial anahsis showed positively EDP
is biodegradable. Physical and chemical analysis, including Fourier Transform Infra Red (FTIR) spectrum
confirmed the biodegradability
Downloads
Download data is not yet available.
Article Details
How to Cite
P, A. (2004). Plastic waste management: Need for a paradigm shift in Malaysia. Malaysian Journal of Science, 23, 1–7. Retrieved from https://samudera.um.edu.my/index.php/MJS/article/view/9027
Section
Original Articles
Transfer of Copyrights
- In the event of publication of the manuscript entitled [INSERT MANUSCRIPT TITLE AND REF NO.] in the Malaysian Journal of Science, I hereby transfer copyrights of the manuscript title, abstract and contents to the Malaysian Journal of Science and the Faculty of Science, University of Malaya (as the publisher) for the full legal term of copyright and any renewals thereof throughout the world in any format, and any media for communication.
Conditions of Publication
- I hereby state that this manuscript to be published is an original work, unpublished in any form prior and I have obtained the necessary permission for the reproduction (or am the owner) of any images, illustrations, tables, charts, figures, maps, photographs and other visual materials of whom the copyrights is owned by a third party.
- This manuscript contains no statements that are contradictory to the relevant local and international laws or that infringes on the rights of others.
- I agree to indemnify the Malaysian Journal of Science and the Faculty of Science, University of Malaya (as the publisher) in the event of any claims that arise in regards to the above conditions and assume full liability on the published manuscript.
Reviewer’s Responsibilities
- Reviewers must treat the manuscripts received for reviewing process as confidential. It must not be shown or discussed with others without the authorization from the editor of MJS.
- Reviewers assigned must not have conflicts of interest with respect to the original work, the authors of the article or the research funding.
- Reviewers should judge or evaluate the manuscripts objective as possible. The feedback from the reviewers should be express clearly with supporting arguments.
- If the assigned reviewer considers themselves not able to complete the review of the manuscript, they must communicate with the editor, so that the manuscript could be sent to another suitable reviewer.
Copyright: Rights of the Author(s)
- Effective 2007, it will become the policy of the Malaysian Journal of Science (published by the Faculty of Science, University of Malaya) to obtain copyrights of all manuscripts published. This is to facilitate:
(a) Protection against copyright infringement of the manuscript through copyright breaches or piracy.
(b) Timely handling of reproduction requests from authorized third parties that are addressed directly to the Faculty of Science, University of Malaya. - As the author, you may publish the fore-mentioned manuscript, whole or any part thereof, provided acknowledgement regarding copyright notice and reference to first publication in the Malaysian Journal of Science and Faculty of Science, University of Malaya (as the publishers) are given.
You may produce copies of your manuscript, whole or any part thereof, for teaching purposes or to be provided, on individual basis, to fellow researchers. - You may include the fore-mentioned manuscript, whole or any part thereof, electronically on a secure network at your affiliated institution, provided acknowledgement regarding copyright notice and reference to first publication in the Malaysian Journal of Science and Faculty of Science, University of Malaya (as the publishers) are given.
- You may include the fore-mentioned manuscript, whole or any part thereof, on the World Wide Web, provided acknowledgement regarding copyright notice and reference to first publication in the Malaysian Journal of Science and Faculty of Science, University of Malaya (as the publishers) are given.
- In the event that your manuscript, whole or any part thereof, has been requested to be reproduced, for any purpose or in any form approved by the Malaysian Journal of Science and Faculty of Science, University of Malaya (as the publishers), you will be informed. It is requested that any changes to your contact details (especially e-mail addresses) are made known.
Copyright: Role and responsibility of the Author(s)
- In the event of the manuscript to be published in the Malaysian Journal of Science contains materials copyrighted to others prior, it is the responsibility of current author(s) to obtain written permission from the copyright owner or owners.
- This written permission should be submitted with the proof-copy of the manuscript to be published in the Malaysian Journal of Science